No products
Prices are tax included
Product successfully added to your shopping cart
Stems
Cranksets / Arms
Spiders
Crank Hardware
Bottom Bracket
Sprokets
Chainrings
Hubsets
Front Hubs
Rear Hubs
Hubs parts access.
Cogs / Freewheels
Drivers
Hub Guards
Chain Tensioners
Seats
Hats
Stems
Sprokets
Hubsets
Hubsets
Front Hubs
Rear Hubs
Cogs
Sporkets
Chainrings
Cogs
Tires
Tubes
Forks
Stems
Cranksets / Arms
Bottom Bracket
Crank Hardware
Sprokets
Chainrings
Spiders
Hubsets
Front Hubs
Rear Hubs
Hubs parts access.
Cogs / Freewheels
Drivers
Hub Guards
Chains
Chain Tensioners
Seats
Rims
Custom Wheelsets
Braking
Hats
FILTERS
Shipping
24/48h Shipping for France. 2 to 4 days for Europe
Shipping offered
from 99 € order (France only)
Paiement
Secure payment SSL credit cards Visa, Mastercard by Stripe.
-
*Only for use with Profile Racing AC-2 BMX Disc Brake Cassette Hub* Adapts disk brake caliper to frames without built in mounts. Simple installation. Replaces disc side hub cone. No bolts or tools required. Sizes: 10mm axle/140mm disc, 15mm axle/140mm disc Color: Black anodize Weight: 70 g/2.44 oz
105,00 € TTC -
Elite Cassette Driver Seal. Used on Elite BMX & Elite MTB style(6 pawl) Cassette Drivers. It is made of black Nylon and marked “Profile Racing Made in USA”.
3,50 € TTC -
Mini Cassette Driver Seal. Used on Mini BMX, Totem BMX, High Flange BMX, & Classic MTB style(4 pawl) Cassette Drivers. It is a standard rubber o-ring.
1,50 € TTC -
The driver shim (or thrust washer) fits between the driver and the hub body bearing and prevents the driver from grinding into the hub body. The same driver spacer is used for every Profile and Madera hub, (Profile Mini, Totem, Elite, High Flange, MTB, and Elite MTB, and Madera V2 Cassette.) -STEEL (.81″ OD X .596″ ID X .025″ THICK).
2,00 € TTC -
Chromoly Flush Mount Crank Bolts. 3/8x24 thd version for solid axle crank sets 19mm. Includes two (2) crank bolts and (2) flush aluminum washers. Weight(per set of two): 36g/1.26 oz
16,00 € TTC -
Chromoly Flush Mount Crank Bolts Gun Drilled Hollow M12 x 1.25 thd version for GDH axle crank sets. Includes two (2) crank bolts and (2) flush aluminum washers. GDH bolts should not be used to pull on your crank arms. For crank arm installation, please use the proper GDH crank tool. Weight(per set of two): 42g/1.47 oz
24,00 € TTC -
Spare parts.Copper spring for Profile Elite freewheel.
5,50 € TTC -
Use to install and remove Spline drive sprockets, Spline Drive Spiders, and crank arms from the 48 spline axle of the Profile and Madera 3-Piece Crankset. 22mm Column axle tool: M17 x 1.25 threads
26,00 € TTC -
Use to install and remove Spline drive sprockets, Spline Drive Spiders, and crank arms from the 48 spline axle of the Profile and Madera 3-Piece Crankset. 22mm Elite TI axle tool: M15 x 1.25 threads
26,00 € TTC -
Use to install and remove Spline drive sprockets, Spline Drive Spiders, and crank arms from the 48 spline axle of the Profile and Madera 3-Piece Crankset. 19mm GDH axle tool: M12 x 1.25 thread
26,00 € TTC -
Use to install and remove Spline drive sprockets, Spline Drive Spiders, and crank arms from the 48 spline axle of the Profile and Madera 3-Piece Crankset. 19mm Solid axle tool: 3/8 x 24 SAE thread
26,00 € TTC -
Aluminum 6-pawl drivers for Profile Elite BMX cassette hubs & Elite MTB 1-spd cassette hubs. Splined RHD (for Profile splined cogs & includes lockring w/ spacer) Drivers include bearings & seals. Pawls, springs not included. RHD Weight: 76g
91,00 € TTC -
Chromoly 6-pawl drivers for Profile Elite BMX cassette hubs & Elite MTB 1-spd cassette hubs. 10 tooth drivers are for 1/8 width chains. Drivers include bearings & seals. Pawls, springs not included. Sizes: 10T RHD, 10T LHD Weight: 131g
95,00 € TTC -
Chromoly 6-pawl drivers for Profile Elite BMX cassette hubs & Elite MTB 1-spd cassette hubs. 9 tooth drivers are for 1/8 width chains. Drivers include bearings & seals. Pawls, springs not included. Sizes: 9T RHD, 9T LHD Weight: 131g
95,00 € TTC -
Aluminum 6-pawl driver for Profile Elite BMX cassette hubs. Splined RHD COMPATIBLE SHIMANO COGS Drivers include bearings and seals. Ratchets, springs not included. RHD Weight : -
91,00 € TTC -
6Al4V Titanium 6-pawl drivers for Profile Elite BMX cassette hubs & Elite MTB 1-spd cassette hubs. 9 tooth drivers are for 1/8 width chains. Drivers include bearings & seals. Pawls, springs not included. Sizes: 10T RHD Weight: 3.2oz /88g
169,00 € TTC -
6Al4V Titanium 6-pawl drivers for Profile Elite BMX cassette hubs & Elite MTB 1-spd cassette hubs. 9 tooth drivers are for 1/8 width chains. Drivers include bearings & seals. Pawls, springs not included. Sizes: 9T RHD, 9T LHD Weight: 3.2oz /88g
169,00 € TTC -
6Al4V Titanium 6-pawl drivers for Profile Elite BMX cassette hubs & Elite MTB 1-spd cassette hubs. Splined RHD (for Profile splined cogs & includes lockring w/ spacer) Drivers include bearings & seals. Pawls, springs not included. RHD Weight: 104g
169,00 € TTC -
ELITE FREEWHEEL TOOL The Elite Freewheel requires a proprietary tool for removal. This is because the inner diameter of the sealed bearing on the freewheel is too small for a standard removal tool to fit properly.
34,00 € TTC -
Profile Hub Axle Nuts & Washers are CNC machined for style and strength. Each axle nut comes with a steel washer. Nuts & washsers sold as sets(2-nuts, 2-washers) 14mm-7075 Aluminum-Use 17mm Socket Weight: 7g/.25 oz
17,00 € TTC -
Replacement heat treated Chromoly Jam Nuts for Profile 14mm cassette hub axles and 14mm front hub axles. Can be used on Mini, Totem, Elite, Z Coaster®, Track or Madera hubs with a 14mm axle. Sold as a set (two nuts)
12,00 € TTC -
Profile Hub Axle Nuts & Washers are CNC machined for style and strength.-Each axle nut comes with a steel washer.-Nuts & washsers sold as sets(2-nuts, 2-washers)-3/8-24 thd New School -7075 Aluminum-Use 15mm SocketWeight: 6g/.21 oz
19,00 € TTC -
Replacement heat treated Chromoly Jam Nuts for Profile 14mm cassette hub axles and 14mm front hub axles. Can be used on Mini, Totem, Elite, Z Coaster®, Track or Madera hubs with a 14mm axle. Sold as a set (two nuts)
39,00 € TTC -
Profile Trucker Hat. Model: LEGACY LOGO MESH TRUCKER HAT Trucker Hat, Legacy Mesh Back (All Black) Sewn with Profile's 55th anniversary patch. Profile legacy logo patch. Patch made and sewn in the USA. One size adjustable.
38,50 € TTC -
Profile Trucker Hat. Model: LIMITED EDITION VINTAGE PROFILE TRUCKER Classic and original Profile logo patch (circa the early 90s) sewn on the front of the Trucker cap. Mesh back. Gray cap, black mesh, anthracite visor. Patch made and sewn in the USA. One size adjustable.
38,50 € TTC -
Profile Hat. Model: PROFILE LIMITED LEGACY 5-PANEL Legacy 5 Panel hat. Stitched with the Profile 55th anniversary patch. Profile Legacy logo fix. Patch made and sewn in the USA. One size adjustable.
38,50 € TTC -
Profile Hat. Model: PROFILE LIMITED LEGACY 5-PANEL Legacy 5 Panel hat. Stitched with the Profile 55th anniversary patch. Profile Legacy logo fix. Patch made and sewn in the USA. One size adjustable.
38,50 € TTC -
Chromoly 4-pawl drivers for Profile Mini, Totem, Madera V2 BMX cassette hubs & Classic MTB 1-spd cassette hubs. Drivers include bearings & seals. Pawls, springs, & cogs not included. Drivers are RHD/LHD compatible. For 1/8 width chains Weight: 102g
77,00 € TTC -
Chromoly 4-pawl drivers for Profile Mini, Totem, Madera V2 BMX cassette hubs & Classic MTB 1-spd cassette hubs. Drivers include bearings & seals. Pawls, springs, & cogs not included. Drivers are RHD/LHD compatible. includes lockring w/ spacer Weight: 136g
77,00 € TTC -
6Al4V Titanium 4-pawl drivers for Profile Mini, Totem, Madera V2 BMX cassette hubs & Classic MTB 1-spd cassette hubs. Drivers include bearings & seals. Pawls, springs, & cogs not included. Drivers are RHD/LHD compatible. includes lockring w/ spacer Weight: 82g
134,00 € TTC -
6Al4V Titanium 4-pawl drivers for Profile Mini, Totem, Madera V2 BMX cassette hubs & Classic MTB 1-spd cassette hubs. Drivers include bearings & seals. Pawls, springs, & cogs not included. Drivers are RHD/LHD compatible. For 1/8 width chains Weight: 72g
134,00 € TTC -
Profile Trucker Hat. Model: NATION MESH TRUCKER HAT Nation Profile logo patch. Green mesh back, camouflage front. Patch made and sewn in the USA. One size adjustable.
38,50 € TTC -
Profile Trucker Hat. Model: NATION TRUCKER HAT Nation Profile logo patch. Patch made and sewn in the USA. One size adjustable.
38,50 € TTC -
Profile Trucker Hat. Model: NATION TRUCKER HAT Nation Profile logo patch. Patch made and sewn in the USA. One size adjustable.
38,50 € TTC -
Aluminum Volcano adapter set with steel washers.2x Volcano adapters and 2x washers.Hides those unsightly 3/8" x 16 tpi socket head bolts.Alloy Volcano adatper has a 3/8" hole, and 4mm deep lip to fill in the gap between a 3/8" bolt and 14mm dropout slot.Steel washers go in between Volcano adapters and frame.
21,00 € TTC -
The "Stem" reference by Profile Made in USA! A unique quality!CNC machined inside and outside.Hollow body has inside to weight gain.Cover engraved Profile. Stack Height: 10mm Steerer Tube Size: 1-1/8″(28.58mm) Handelbar Size: 7/8″(22.22mm) Weight:48mm: 272g/9.55oz53mm: 288g/10.15oz
106,00 € TTC
