FILTERS
Shipping
43 products.
Machined from super hard 7075 aluminum, these 3/8″(10mm) axle to 14mm dropout adapters are much lighter than a steel version, but just as strong! -Price is for a set (2-alum adapters & 2-steel washers) Weight: 16g/.56 oz
The Slack Cam Ring is one of the key components in the Profile Z Coaster® hub. It determines the amount of “Slack”or “Free Pedal” needed to engage/disengage the freecoaster mechanism. 60 Degrees (1/6 of a crank)
The Slack Cam Ring is one of the key components in the Profile Z Coaster® hub. It determines the amount of “Slack”or “Free Pedal” needed to engage/disengage the freecoaster mechanism. 75 Degrees (1/5 of a crank)
Profile Racing’s Aluminum Hub Axles are precision CNC machined from 7075 Aluminum for unmatched strength and lightness. Mini Front 3/8″ Threaded Axle (fits Profile Mini, Totem, Elite, & Madera front hubs) Width: 100mm. Weight: 36g/1.26 oz
Profile Racing’s Aluminum Hub Axles are precision CNC machined from 7075 Aluminum for unmatched strength and lightness. Elite Cassette 3/8″ Threaded Axle(fits Profile Elite cassette hubs). Width: 110mm. Weight: 40g/1.4 oz
Profile Racing’s Aluminum Hub Axles are precision CNC machined from 7075 Aluminum for unmatched strength and lightness. Mini Cassette 3/8″ Threaded Axle (fits Profile Mini, Totem, High Flange, & Madera cassette hubs) Width: 110mm. Weight: 40g/1.4 oz
Profile Racing’s Chromoly Hub Axles are precision CNC machined and heat treated for unmatched strength and durability. Mini Front 3/8″ Threaded Axle (fits Profile Mini, Totem, Elite, & Madera front hubs) Width: 100mm. Weight: 98g
Profile Racing’s Chromoly Hub Axles are precision CNC machined and heat treated for unmatched strength and durability. Mini Cassette 3/8″ Threaded Axle (fits Profile Mini, Totem, High Flange, & Madera cassette hubs) Width: 110mm. Weight: 109g
Profile Racing’s Chromoly Hub Axles are precision CNC machined and heat treated for unmatched strength and durability. 14mm GDH Mini Rear Axle(fits Profile Mini & Madera front hubs)14mm axles include cone spacers and two jam nuts Weight: 197g/6.95 oz
Profile Racing’s Chromoly Hub Axles are precision CNC machined and heat treated for unmatched strength and durability. 14mm Solid Mini Cassette Axle(fits Profile Mini, Totem, High Flange, & Madera cassette hubs)14mm axles include cone spacers and two jam nuts Weight: 232g/8.12 oz
Profile Racing’s TITANIUM Hub Axles are precision CNC machined and heat treated for unmatched strength and durability. 14mm GDH Mini Rear Axle(fits Profile Mini & Madera front hubs)14mm axles include cone spacers and two jam nuts Weight: 125g/4.40z
This Lock Ring & Spacer will fit on ANY Profile Racing one speed(single cog) splined driver. 7075 Aluminum Silver only Price includes both pieces Uses a 36mm wrench
Back in 09, Profile Racing introduced the product that revolutionized all current methods of holding your wheel onto your bicycle. It’s the Profile Volcano Cone Washer. Made in the USA from aluminum, these shapely devices hide those unsightly allen bolt heads and smooth out the look of your dropouts without adding significant weight. For use with...
Profile Hub Axle Nuts & Washers are CNC machined for style and strength. Each axle nut comes with a steel washer. Nuts & washsers sold as sets(2-nuts, 2-washers) 14mm-7075 Aluminum-Use 17mm Socket Weight: 7g/.25 oz
Profile Hub Axle Nuts & Washers are CNC machined for style and strength.-Each axle nut comes with a steel washer.-Nuts & washsers sold as sets(2-nuts, 2-washers)-3/8-24 thd New School -7075 Aluminum-Use 15mm SocketWeight: 6g/.21 oz
Replacement heat treated Chromoly Jam Nuts for Profile 14mm cassette hub axles and 14mm front hub axles. Can be used on Mini, Totem, Elite, Z Coaster®, Track or Madera hubs with a 14mm axle. Sold as a set (two nuts)
Small details make a big difference… This is surely the case with Profile’s BMX hub cone spacers. The spacers feature clean styling and brilliant colored anodizing. For use on non drive side of 14mm cassette hub axles & both sides of 14mm front hub axles. They will fit Profile (Elite, Totem, Mini, Z Coaster®) and Madera 14mm BMX hub axles. Sold by unit
The driver shim (or thrust washer) fits between the driver and the hub body bearing and prevents the driver from grinding into the hub body. The same driver spacer is used for every Profile and Madera hub, (Profile Mini, Totem, Elite, High Flange, MTB, and Elite MTB, and Madera V2 Cassette.) -STEEL (.81″ OD X .596″ ID X .025″ THICK).
Small details make a big difference! This is surely the case with 3/8″ axle rear hub cone spacers. The aluminum spacers feature clean styling and an added hardened steel serrated washer. These cone spacer sets will work on Profile Elite BMX, Profile Mini, & Madera hubs with 3/8″ axles Sold as sets(two spacers)
Small details make a big difference! This is surely the case with 3/8″ axle rear hub cone spacers. The aluminum spacers feature clean styling and an added hardened steel serrated washer. These cone spacer sets will work on Profile Elite BMX, Profile Mini, & Madera hubs with 3/8″ axles Sold as sets(two spacers)
Replacement heat treated Chromoly Jam Nuts for Profile 14mm cassette hub axles and 14mm front hub axles. Can be used on Mini, Totem, Elite, Z Coaster®, Track or Madera hubs with a 14mm axle. Sold as a set (two nuts)
Elite Cassette Driver Seal. Used on Elite BMX & Elite MTB style(6 pawl) Cassette Drivers. It is made of black Nylon and marked “Profile Racing Made in USA”.
Mini Cassette Driver Seal. Used on Mini BMX, Totem BMX, High Flange BMX, & Classic MTB style(4 pawl) Cassette Drivers. It is a standard rubber o-ring.
Spare parts.4 pawls for Driver Profile Mini.Compatible only with Profile Mini drivers.
If your hub has a slight side to side wobble, then Profile Hub Shims may fix it. They are designed to be installed behind the bearing, requiring you to disassemble and then reassemble your hubs. Hub Shims are only .005″ each. If there is a significant wobble to your hub, a shim is probably not going to make a difference- the wobble is being caused by a...
Spare parts. 6 pawls for Driver Profile Elite. Compatible only with Profile Elite drivers.
Spare parts. 6 pawls for Freewheels Profile Elite. Compatible only with Profile Elite freewheels.
Spare parts.Steel spring Profile Driver.All Profile Racing and Madera cassette hub drivers use the exact same springs.
Spare parts.Copper spring for Profile Elite freewheel.
Replacement bearings for all Profile BMX, MTB, TRACK and Madera hub shells. They are sealed and self-lubricating. 6902 bearing (sold individualy) (15MM ID x 28MM OD x 7MM W)For Profile Fixed/Track Rear Hubs & Road Cassette Hubs. Each hub shell uses two bearings. Bearing seal color subject to change without notice.
Replacement bearings for Profile Elite 15/20 BMX and Elite MTB front hubs. Also used in Elite 15/20 cassette driver Elite 20mm MR2-1531 (21.5MM ID x 31MM OD x 7MM W) For Profile Elite 15/20 BMX and Elite MTB front hubs. Also used in Elite 15/20 cassette driver. Each hub shell uses two bearings. Bearing seal color subject to change without notice.
Replacement bearings for all Profile BMX, MTB, TRACK and Madera hub shells. They are sealed and self-lubricating. Set X2 6903 bering (17MM ID x 30MM OD x 7MM W) For Profile Mini, Totem, Elite Bmx, Elite MTB, & Classic MTB hubs, as well as Fixed/Track Front Hubs, Madera Front Pilot and Madera Rear V-2 hubs. Each hub shell uses two bearings. Bearing...
Z Coaster® BEARINGS Replacement Hub bearings for the Z Coaster® hub driver. There are Two (2) MFG #6802. (15MM ID x 24MM OD x 5MM W) bearings in a Profile Racing Z Coaster® hub driver.
Chromoly 3/8-16 thd (10mm) button head bolts for use in any Profile BMX/MTB or Madera 3/8″ threaded hub axle. Bolts sold individually. Aluminum washer included. Use 8mm hex key. Note: 3/8 bolts NOT intended for peg use.. Weight: 33g
Chromoly 3/8-16 thd (10mm) to 14mm for PEG button head bolts for use in any Profile BMX/MTB or Madera 3/8″ threaded hub axle.The peg version. This bolt has a longer 14mm step section that’s long enough for both a 14mm peg as well as a 14mm dropout. Bolts sold individually. Aluminum washer included. Use 8mm hex key. Weight: 43g
Chromoly 3/8-16 thd (10mm) to 14mm button head bolts for use in any Profile BMX/MTB or Madera 3/8″ threaded hub axle. Bolts sold individually. Aluminum washer included. Use 8mm hex key. Note: 3/8 bolts NOT intended for peg use.. Weight: 36g