Cookie Consent by PrivacyPolicies.com

Profile Racing

229 products.

  • PROFILE

    Use to install and remove Spline drive sprockets, Spline Drive Spiders, and crank arms from the 48 spline axle of the Profile and Madera 3-Piece Crankset. 22mm Column axle tool: M17 x 1.25 threads

    26,00 € TTC
  • PROFILE

    BMX stems for old school bike technology. CrMo quill and expander wedge. Quill diameter is 20.58mm – fits 1-inch steerer tube. Sizes: Pro(46mm) Colors: “Show”Polished Weight Pro: 596g/20.86

    133,00 € TTC
  • PROFILE

    These sprocket Insert are proprietary to the Profile Sabre sprocket and Madera Signet Guard. Made from 4140 chromoly. Available to adapt your Sabre or Madera Signet Guard sprockets to either: 22mm Spline Drive

    13,00 € TTC
  • PROFILE

    Use to install and remove Spline drive sprockets, Spline Drive Spiders, and crank arms from the 48 spline axle of the Profile and Madera 3-Piece Crankset. 19mm GDH axle tool: M12 x 1.25 thread

    26,00 € TTC
  • PROFILE

    Titanium 3/8 x 24 thread Standard Sprocket Bolt Button Head bolt style Weight: 8g

    19,00 € TTC
  • PROFILE

    Elite Cassette Driver Seal. Used on Elite BMX & Elite MTB style(6 pawl) Cassette Drivers. It is made of black Nylon and  marked “Profile Racing Made in USA”.

    3,50 € TTC
  • PROFILE

    Mini Cassette Driver Seal. Used on Mini BMX, Totem BMX, High Flange BMX, & Classic MTB style(4 pawl) Cassette Drivers. It is a standard rubber o-ring.

    1,50 € TTC
  • PROFILE

    RETRO-American cups and bearings for your Profile Racing 3-Piece Race Style Crank set – comes with flat cups, sealed bearings, tube spacer and aluminum spacer washers. These are the original styled American BB cups, perfect for your vintage restoration. Silver. For 19mm Axle & American BB. SS-American cups and bearings for your Profile Racing 3-Piece...

    46,00 € TTC
  • PROFILE

    For use on frames with American BB shells. Formerly known as the American Bottom Bracket with Hop Up Kit. Gives your Profile crankset that “finished” look. Includes cups, sealed bearings, tube spacer, cone washers, and flat washers. SS 7/8 bottom brackets will only fit the late 90’s, Profile SS cranks. Weight: 19mm axle BB-265g/9.27 oz

    58,00 € TTC
  • PROFILE

    The Profile Racing Chrome Moly Race Crankset(RHD) is everything you need to run Profile cranks except the bottom bracket (which is sold seperately). The Profile 19mm ‘Race Crank’ is made for any type of riding, whether it be Bmx Race, Bmx Freestyle, or MTB. Right hand crank arm has sprocket boss. RHD crankset includes crank arms, 19mm GDH heat-treated...

    276,00 € TTC
  • PROFILE

    *Only for use with Profile Racing AC-2 BMX Disc Brake Cassette Hub* Adapts disk brake caliper to frames without built in mounts. Simple installation. Replaces disc side hub cone. No bolts or tools required. Sizes: 10mm axle/140mm disc, 15mm axle/140mm disc Color: Black anodize Weight: 70 g/2.44 oz

    105,00 € TTC
  • PROFILE

    The High Flange Front Hub is the forerunner of Profile Racing’s current Mini Front Hub. Both hubs use the same axle bolts, but not the same axle. They are suitable for trails, racing, street, and park use. Front: High Flange hubshell. Aluminum hollow 3/8″axle for dramatic weight savings. Standard 3/8 socket head bolts(8mm hex)- come with polished Volcano...

    434,00 € TTC
  • PROFILE

    The Profile Racing Chrome Moly Race Crankset(RHD) is everything you need to run Profile cranks except the bottom bracket (which is sold seperately).The Profile 19mm ‘Race Crank’ is made for any type of riding, whether it be Bmx Race, Bmx Freestyle, or MTB.Right hand crank arm has sprocket boss.RHD crankset includes crank arms, 19mm GDH heat-treated CrMo...

    357,00 € TTC
Showing 217 - 229 of 229 items