No products
Prices are tax included
Product successfully added to your shopping cart
Stems
Cranksets / Arms
Spiders
Crank Hardware
Bottom Bracket
Sprokets
Chainrings
Hubsets
Front Hubs
Rear Hubs
Hubs parts access.
Cogs / Freewheels
Drivers
Hub Guards
Chain Tensioners
Seats
Hats
Stems
Sprokets
Hubsets
Hubsets
Front Hubs
Rear Hubs
Cogs
Sporkets
Chainrings
Cogs
Tires
Tubes
Forks
Stems
Cranksets / Arms
Bottom Bracket
Crank Hardware
Sprokets
Chainrings
Spiders
Hubsets
Front Hubs
Rear Hubs
Hubs parts access.
Cogs / Freewheels
Drivers
Hub Guards
Chains
Chain Tensioners
Seats
Rims
Custom Wheelsets
Braking
Hats
FILTERS
Shipping
24/48h Shipping for France. 2 to 4 days for Europe
Shipping offered
from 99 € order (France only)
Paiement
Secure payment SSL credit cards Visa, Mastercard by Stripe.
Viewed products
-
MADERA V2 BUTTON HEAD 9T...
Madera designed the V2 Cassette Hub to be the best all around hubs...
-
ONYX HELIX 20 ULTRA 10 GOLD 36H HUBSET
ONYX Shell Gold, Widget Gold Anodized...
727,92 € -20% 909,90 €
Profile Racing
281 products.
-
If your hub has a slight side to side wobble, then Profile Hub Shims may fix it. They are designed to be installed behind the bearing, requiring you to disassemble and then reassemble your hubs. Hub Shims are only .005″ each. If there is a significant wobble to your hub, a shim is probably not going to make a difference- the wobble is being caused by a...
8,00 € TTC -
These sprocket Insert are proprietary to the Profile Sabre sprocket and Profile, Madera Signet Guard. Made from 4140 chromoly. Available to adapt your Sabre or Madera Signet Guard sprockets to either: 24mm Bolt On.
13,00 € TTC -
The High Flange Front Hub is the forerunner of Profile Racing’s current Mini Front Hub. Both hubs use the same axle bolts, but not the same axle. They are suitable for trails, racing, street, and park use.FREEWHEEL VERSION Front: High Flange hubshell. Aluminum hollow 3/8″axle for dramatic weight savings. 3/8″ Aluminum center axle with chromoly studs and...
494,00 € TTC -
Spare parts. 6 pawls for Driver Profile Elite. Compatible only with Profile Elite drivers.
72,00 € TTC -
The High Flange Front Hub is the forerunner of Profile Racing’s current Mini Front Hub. Both hubs use the same axle bolts, but not the same axle. They are suitable for trails, racing, street, and park use.FREEWHEEL VERSION Front: High Flange hubshell. Aluminum hollow 3/8″axle for dramatic weight savings. 3/8″ Aluminum center axle with chromoly studs and...
494,00 € TTC -
Spare parts. 6 pawls for Freewheels Profile Elite. Compatible only with Profile Elite freewheels.
60,00 € TTC -
Profile Racing designed Nomad Hubs to best compliment the Profile Elite Freewheel. The hub shell is the same style as Profile’s Elite hubs, so an Elite front will match perfect!The Elite Front 15/20 Profile Racing hub was created for the new era forks and designed to be the best racing hub available. Designed to match the style of the Elite cassette hub...
381,00 € TTC -
Replacement parts.Set of 4 steel springs for Profile Drivers.All Profile Racing and Madera cassette hub drivers use the exact same springs.
22,00 € TTC -
Profile Racing designed Nomad Hubs to best compliment the Profile Elite Freewheel. The hub shell is the same style as Profile’s Elite hubs, so an Elite front will match perfect!Elite Front Hubs are designed to match the style of the Elite and Totem cassette hubs as well as the Nomad Freewheel hub. Front: Low Flange hubshellChromoly hollow 3/8″axle for...
341,00 € TTC -
Replacement parts. Set of 6 steel springs for Profile Drivers. All Profile Racing and Madera cassette hub drivers use the exact same springs.
33,00 € TTC -
Profile Racing designed Nomad Hubs to best compliment the Profile Elite Freewheel. The hub shell is the same style as Profile’s Elite hubs, so an Elite front will match perfect!Elite Front Hubs are designed to match the style of the Elite and Totem cassette hubs as well as the Nomad Freewheel hub. Front: Low Flange hubshellChromoly hollow 3/8″axle for...
341,00 € TTC -
Spare parts. Copper spring for Profile Elite freewheel. Set of 6 spring.
33,00 € TTC -
Profile Racing designed Nomad Hubs to best compliment the Profile Elite Freewheel. The hub shell is the same style as Profile’s Elite hubs, so an Elite front will match perfect!Elite Front Hubs are designed to match the style of the Elite and Totem cassette hubs as well as the Nomad Freewheel hub. Front: Low Flange hubshellChromoly hollow 3/8″axle for...
341,00 € TTC -
Profile Racing designed Nomad Hubs to best compliment the Profile Elite Freewheel. The hub shell is the same style as Profile’s Elite hubs, so an Elite front will match perfect!Elite Front Hubs are designed to match the style of the Elite and Totem cassette hubs as well as the Nomad Freewheel hub. Front: Low Flange hubshellChromoly hollow 3/8″axle for...
341,00 € TTC -
Profile Racing designed Nomad Hubs to best compliment the Profile Elite Freewheel. The hub shell is the same style as Profile’s Elite hubs, so an Elite front will match perfect!Elite Front Hubs are designed to match the style of the Elite and Totem cassette hubs as well as the Nomad Freewheel hub. Front: Low Flange hubshellChromoly hollow 3/8″axle for...
341,00 € TTC -
Replacement bearings for all Profile BMX, MTB, TRACK and Madera hub shells. They are sealed and self-lubricating. 6902 bearing (sold individualy) (15MM ID x 28MM OD x 7MM W)For Profile Fixed/Track Rear Hubs & Road Cassette Hubs. Each hub shell uses two bearings. Bearing seal color subject to change without notice.
8,00 € TTC -
Replacement bearings for Profile Elite 15/20 BMX and Elite MTB front hubs. Also used in Elite 15/20 cassette driver Elite 20mm MR2-1531 (21.5MM ID x 31MM OD x 7MM W) For Profile Elite 15/20 BMX and Elite MTB front hubs. Also used in Elite 15/20 cassette driver. Each hub shell uses two bearings. Bearing seal color subject to change without notice.
8,00 € TTC -
Replacement bearings for all Profile BMX, MTB, TRACK and Madera hub shells. They are sealed and self-lubricating. Set X2 6903 bering (17MM ID x 30MM OD x 7MM W) For Profile Mini, Totem, Elite Bmx, Elite MTB, & Classic MTB hubs, as well as Fixed/Track Front Hubs, Madera Front Pilot and Madera Rear V-2 hubs. Each hub shell uses two bearings. Bearing...
16,00 € TTC -
Z Coaster® BEARINGS Replacement Hub bearings for the Z Coaster® hub driver. There are Two (2) MFG #6802. (15MM ID x 24MM OD x 5MM W) bearings in a Profile Racing Z Coaster® hub driver.
14,00 € TTC -
Chromoly 3/8-16 thd (10mm) button head bolts for use in any Profile BMX/MTB or Madera 3/8″ threaded hub axle. Bolts sold individually. Aluminum washer included. Use 8mm hex key. Note: 3/8 bolts NOT intended for peg use.. Weight: 33g
18,00 € TTC -
Chromoly 3/8-16 thd (10mm) to 14mm for PEG button head bolts for use in any Profile BMX/MTB or Madera 3/8″ threaded hub axle.The peg version. This bolt has a longer 14mm step section that’s long enough for both a 14mm peg as well as a 14mm dropout. Bolts sold individually. Aluminum washer included. Use 8mm hex key. Weight: 43g
18,00 € TTC -
Chromoly 3/8-16 thd (10mm) to 14mm button head bolts for use in any Profile BMX/MTB or Madera 3/8″ threaded hub axle. Bolts sold individually. Aluminum washer included. Use 8mm hex key. Note: 3/8 bolts NOT intended for peg use.. Weight: 36g
18,00 € TTC -
Titanium 3/8-16 thd button head bolts for use in any Profile BMX/MTB or Madera 3/8″ threaded hub axle. CNC machined from highest quality 6Al-4V Titanium Bolts sold individually Aluminum washer included Use 8mm hex key Note: 3/8 titanium bolts NOT intended for peg use. Weight: 19g
29,50 € TTC -
Titanium 3/8-16 thd to 14mm step(for use in 14mm dropouts) button head bolts for use in any Profile BMX/MTB or Madera 3/8″ threaded hub axle. CNC machined from highest quality 6Al-4V Titanium Bolts sold individually Aluminum washer included Use 8mm hex key Note: 3/8 titanium bolts NOT intended for peg use. Weight: 20g
29,50 € TTC -
Chromoly 3/8-16 thd socket head bolts for use in any Profile BMX/MTB or Madera 3/8″ threaded hub axle. Bolts sold individually Washers and cones not included Use 8mm or 5/16′ hex keys Weight: 25g
8,50 € TTC -
Chromoly 3/8-16 thd (10mm) HEX 17mm head bolts for use in any Profile BMX/MTB or Madera 3/8″ threaded hub axle. Bolts sold individually. Aluminum washer included. Use 17mm key. Note: 3/8 bolts NOT intended for peg use. Weight: 37g
18,00 € TTC -
Chromoly 3/8-16 thd (10mm) to 14mm HEX 17mm head bolts for use in any Profile BMX/MTB or Madera 3/8″ threaded hub axle.Peg version. This bolt has a longer 14mm step section that’s long enough for both a 14mm peg as well as a 14mm dropout. Bolts sold individually. Aluminum washer included. Use 17mm key. Weight: 45g
18,00 € TTC -
Chromoly 3/8-16 thd (10mm) to 14mm HEX 17mm head bolts for use in any Profile BMX/MTB or Madera 3/8″ threaded hub axle. Bolts sold individually. Aluminum washer included. Use 17mm key. Note: 3/8 bolts NOT intended for peg use. Weight: 41g
18,00 € TTC -
Titanium 3/8-16 thd socket head bolts for use in any Profile BMX/MTB or Madera 3/8″ threaded hub axle. Bolts sold individually CNC machined from highest quality 6Al-4V Titanium Washers and cones not included Use 8mm or 5/16′ hex keys Weight: 14g
29,50 € TTC